Modular Precision Hydroponics & Optimization Studio
An autonomous, industrial-grade indoor farming platform engineered for urban agriculture, household nutritional sovereignty, and commercial microgreens. Deploy our pre-assembled, wet-tested Single-Tier 6-Tray Physical Unit (standardized for NC BPA-Free 2-layer sprouter trays), or Bring Your Own Hardware (BYOH) and subscribe to our standalone Cloud Optimization Studio to redesign custom tray sizes (Length × Width), model 36 crop varieties, and verify financial economic viability before planting.
IES-HYD-T1 • Cloud SaaS
Engineered for Autonomous Reliability
Designed from the ground up to solve the real-world operational challenges of commercial indoor farming: chemical equilibrium, electrical energy costs, blackout resilience, and sensor wiring durability.
Nutrient Sweet-Spot Harmonizer
Solves the fundamental challenge of shared recirculating water across 20 distinct crops. The optimizer clusters compatible crops into a narrow physiological pH sweet-spot (5.8 – 6.4) and decouples initial germination into a zero-fertilizer micro-nursery.
- • Prevents seedling osmotic burn
- • 4-Channel precision peristaltic dosing
- • Automatic pH Up/Down & A/B stock feeds
Custom Tray Sizing & Economic Viability Engine
Enables growers to redesign their physical setup beyond fixed defaults. Input custom tray dimensions (Length × Width × Flood Depth) for 1020 flats or DIY flood tables, configure modular tier counts, optimize across 36 crop cultivars (18 microgreens + 18 true-leaf shaak), and run economic viability simulations to calculate net monthly profit (Revenue minus Operating Costs) and live break-even ROI before planting.
- • Custom Tray Geometry (Length × Width) & Dynamic Area Scaling
- • 36-Cultivar Dual-Zone Agronomy & Custom Daily Demand Quotas
- • Live Break-Even & Annual ROI Simulation (BOM vs. Turnkey)
- • Domestic & Commercial Electricity Tariff Modeling (Night Shift ToD)
Distributed Dual-Core Edge
Separates hard real-time sensor sampling and relay switching from network communication. A dedicated real-time embedded controller manages millisecond actuator safety and analog sensor stability, while an IoT wireless gateway handles local network communication, data streaming, and cloud synchronization.
- • Optocoupled relay isolation for electrical noise immunity
- • Isolated high-speed inter-controller communication bus
- • Multi-threaded real-time task management
Continuous Offline Data Logging
Never lose a single sensor reading. The IoT controller writes continuous 10-second data records directly to an onboard industrial storage card. An automated synchronization pointer tracks log integrity, uploading unsynced batches whenever network connectivity is established.
- • Multi-year local data buffer capacity
- • Zero dependency on continuous Internet connection
- • Interactive web charting & 1-click CSV export
Cloud Web Command Center
Fully browser-accessible cloud architecture hosted directly on our production platform. The onboard IoT hardware controller connects over Wi-Fi and transmits live telemetry straight to your cloud dashboard, with zero software installation or local home server setup.
- • Zero local server or home computer setup required
- • Accessible anywhere via mobile, tablet, or desktop browser
- • Real-time telemetry, automated dosing & remote controls
Industrial Quick-Connect Harness
Eliminates delicate wiring with robust, keyed industrial quick-connect socket harnesses. Enables effortless sensor maintenance, reservoir sanitation, and rapid field deployment without electrical troubleshooting.
- • 3-Wire: Water Temperature Sensor, Liquid Float Probes
- • 4-Wire: Canopy Climate Sensor, Ambient Light Sensor
- • BNC Panel mount for water chemistry pH probe
Turnkey Hardware Appliances & Standalone Cloud SaaS
Choose between pre-assembled, factory-calibrated physical units or license our optimization engine as a 100% standalone software-only SaaS with your own custom racks and tray sizes.
Already Have Existing Racks or Custom Trays? Use Standalone SaaS!
You do not need to purchase physical hardware to access our agronomy and mathematics studio. Redesign your fixed physical setup parameters with complete flexibility: input custom tray dimensions (Length × Width × Flood Depth) for 1020 flats, commercial flood benches, or custom DIY gutters. The cloud engine automatically scales cultivation area, re-indexes seed density, balances 36 cultivars, and runs real-time economic viability simulations (net monthly profit and live break-even ROI) tailored specifically to your custom setup.
Works on any smartphone, tablet, or PC browser. Instant cloud activation.
Explore SaaS Packages →Standalone Cloud SaaS Studio
For growers with existing racks or DIY flood setups. Unlocks our full mathematical optimization suite, custom tray sizing, 36-cultivar agronomy, demand scheduling, and economic viability simulations without buying physical hardware.
- ✓ Precision Pro (₹1,999/yr): Custom Tray L × W, 36 cultivars, tariffs, and live break-even ROI.
- ✓ Commercial Enterprise (₹4,999/yr): Multi-rack fleet, commercial 1020/flood benches, 5-yr NPV & BOQ.
- ✓ Demand Targets: Custom daily target & min/max tray bounds.
- ✓ Dynamic Break-Even: Live payback days & annual ROI (%) simulations.
- ✓ Cloud Access: Zero software installation; works in any modern browser.
Single-Tier 6-Tray Turnkey Unit
Compact, ultra-efficient desktop and kitchen vertical farm (100cm W × 50cm D × 65cm H). Includes anodized structural rack, 6 NC BPA-Free 2-layer sprouter trays (32.3×23.5cm), 40W Samsung LM301B LEDs, 15L reservoir, 4 dosing pumps, and 12h battery backup.
- ✓ Pre-assembled, wet-tested & factory-calibrated
- ✓ 6-Pack NC BPA-Free 2-layer sprouter trays included
- ✓ Integrated 4-channel peristaltic dosing pumps
- ✓ Water chemistry (pH), nutrient (TDS), and temp probes
- ✓ 12-hour battery blackout survival UPS
- ✓ Full access to Cloud & Local Optimization Studio
Core Automation Controller Hub
Modular automation and sensor hub for growers with existing rack infrastructure. Features a sealed IP65 control enclosure, distributed real-time embedded controller, IoT wireless gateway, 4-pump precision chemical dosing module, quick-connect sensor harness, and uninterrupted 12-hour battery backup.
- ✓ Quick-disconnect industrial harness for all probes
- ✓ Automated closed-loop chemical dosing algorithms
- ✓ Offline hardware logging with cloud synchronization
- ✓ Domestic electricity tariff optimizer included
- ✓ 12-hour uninterrupted battery backup
- ✓ Includes Pro SaaS cloud telemetry license
Custom Vertical Farm Fabrication, Institutional PO & SaaS Licensing
Whether ordering turnkey physical units, custom dimensional fabrication, site delivery across India, or subscribing to cloud SaaS under SAC 998311, connect directly with our engineering sales team.
Operational Insights & System Capabilities
Can I use the Smart Hydroponic Studio as a software-only SaaS with my own custom rack and tray sizes?
Yes, absolutely! You do not need to buy our physical hardware. Our standalone Cloud SaaS subscriptions (starting at ₹1,999/year under statutory SAC 998311) support Bring Your Own Hardware (BYOH). You can input any custom tray dimensions (Length × Width × Flood Depth) for 1020 microgreen flats, commercial flood benches, or custom DIY gutters. The mathematical optimization engine dynamically recalculates cultivation surface area, rescales seed densities and expected harvest yields across all 36 cultivars, and delivers optimized planting schedules without hardware lock-in.
How does the Economic Viability Checker and Break-Even simulation work for custom setups?
The built-in economic viability engine allows you to input your regional electricity tariffs (such as domestic slabs or Time-of-Day night shift rates), wholesale seed costs, nutrient dosing consumables, and local crop selling prices. The engine computes monthly gross revenue, total operating expenses (OpEx), net profit (Net Profit = Revenue − Operating Expenses), and live break-even payback days against either your DIY Bill of Materials (BOM) or Turnkey CapEx, with real-time annual ROI projections.
How does the Nutrient Sweet-Spot Harmonizer balance different plants in the same recirculating water?
Plants in hydroponics thrive within a common intersection of nutrient availability. Iron and phosphorus uptake peak near pH 5.8–6.0, while nitrogen, potassium, and calcium uptake remain robust up to pH 6.4. The unit clusters crops with overlapping pH tolerances (5.8 to 6.4) in the main recirculating system. Delicate initial germination is physically decoupled into a nursery tray with plain water, ensuring seeds never experience osmotic stress until true leaves appear and roots are ready for full mineral feed.
How does the unit keep monthly electrical power bills so low?
The internal optimizer considers two critical electrical dynamics: (1) Single-Tier LED High Efficiency: The single tier utilizes two high-efficiency Samsung LM301B LED bars (40W total) providing 150–220 µmol/m²/s uniform PAR flux across all 6 trays with zero wasted spillover. (2) Night-Shift Photoperiods: By running the 14-hour lighting cycle from 8:00 PM to 10:00 AM, the system avoids hot daytime ambient temperatures, keeping canopy ventilation fan duty low and reducing total electrical consumption to just 24–28 kWh/month (₹180 – ₹210 on West Bengal domestic Slab 2 tariffs).
What is the expected monthly fresh greens harvest from the 6-tray sprouter unit?
Standardized with the Amazon's Choice NC 6-Pack BPA-Free 2-Layer Seed Sprouter Trays (32.3cm × 23.5cm / 9.25" × 1.42" × 12.72"), each tray yields 110g to 200g of fresh microgreens per cycle depending on the variety (e.g. Sunflower ~174g, Moong ~182g, Radish ~166g). Across 6 staggered cultivation slots with rolling harvest schedules, the unit produces 3.0 to 4.8 kg of fresh greens every month (100g to 160g daily harvest), delivering fresh greens for daily family nutrition.
What happens during severe power cuts or network disconnection?
The unit features a dedicated rechargeable battery pack with an automatic switchover circuit providing 12 hours of uninterrupted DC power for the controllers, sensors, and intermittent root misting. Sensor readings continue to append to the onboard storage card every 10 seconds. When network connectivity reconnects, an automated pointer uploads all buffered historical rows directly to your cloud web dashboard with zero data loss.
How does the Cloud Web Command Center work?
The system operates in Cloud Web Mode: The onboard IoT controller connects to your home or facility Wi-Fi and securely streams real-time telemetry straight to the central cloud platform at Innovation Edge Solutions. You can monitor live water chemistry (pH/TDS), configure photoperiods, trigger manual or automated chemical dosing, and review crop growth history from any smartphone, tablet, or PC browser worldwide—with zero local software installation or home server setup required.
Launch Precision Microgreen Cultivation Today
Explore the live control dashboard, inspect telemetry logs, or speak with our engineering team to commission a turnkey modular unit.